Maintenance and replacement of the blade for model RX

• Periodically examine the cutting blade for any damage.
  • Use only a sharp blade. Replace a damaged blade.
  • Replace the blade once a year between seasons.

IMPORTANT! Sharpening is not allowed, since it may create unbalance.

1. Power Robomow off by pressing the GO button for 2 seconds.
   
   
   
   
2. Remove the Disabling Device.
   
   
   
   
3. Put on heavy-duty gloves, and place RoboTool over the blade so that it covers the whole blade.
   
   
   
   
4. Use the provided Allen tool (comes with a replacing blade) to unscrew the screws while holding the blade with the RoboTool.
5. Replace the blade with a new one (Part No. MRK9100A).
6. Make sure to close both screws tightly.