If the charging station LED is flashing green even though the mower is in the station and not charging, the charging electronics may have hung up.
Please try the following:
Disconnect the charger from the power supply and plug it back in after 10 seconds. After that, the charging station LED should light up constantly and the robot should be charging again.
Under any circumstances, it might be necessary to repeat this process several times.
Comments
5 comments
I've tried this several times & the problem persists. Robomow is completely dead. When I switch the power back on the charging light stays solid green & the display on the Robomow repeatedly turns on & off. After about 1 minute the light starts flashing green & display goes stops turning on & off again.
i have the same issue as Conor Darcy. Any solutions for this issue ?
Yes Annelore, I left it in the charger & I think I turned the safety switch off (the on/off switch on the mower itself). After about a day I turned it back on & left it overnight again. Eventually I got the 'Balancing battery cells' icon on the screen (click here & you can see this on page 49 of the manual).
That took probably another day to complete & then all was fine. All in all it took 2 days to resolve.
I hope this helps.
Thank you for your help !
Similar issue again but this time the mower goes into the basestation, light stays flashing green, mower reverses out, goes back in, light stays green mower reverses etc.
This process repeats a while then the mowers gives up & heads off around the perimeter again.
(It seems there is a different problem with my Robomow every week or two.)
Please sign in to leave a comment.