Robomow Help Center Type your question Or Choose a category to find the help you need

How to Adjust the Cutting Height in Robomow

This article contains the following sections:

For RC / MC models
For RS / MS models

 

For RC / MC models

Blade Cutting Range: 15 – 60 mm (0.6 – 2.4 inches)

To adjust the cutting height of the blade, do the following:

CAUTION! ALWAYS TURN THE SAFETY SWITCH OFF BEFORE ADJUSTING THE CUTTING HEIGHT!

          

  • Lift the front side of the mower
  • Turn the knob while pushing it down
  • To lower the cutting height, turn anticlockwise
  • The cutting height is displayed at the side of the mower

 

 

For RS / MS models

Blade Cutting Range: 20 – 80 mm (0.8 – 3 inches)

To adjust the cutting height of the blade, do the following:

CAUTION! ALWAYS TURN THE SAFETY SWITCH OFF BEFORE ADJUSTING THE CUTTING HEIGHT!

  • Lift the Door panel at the top of the mower
  • Turn the knob (A) while pushing it down
  • To raise the cutting height, turn Anti Clockwise
  • To lower the cutting height, turn Clockwise
  • The cutting height (B) is displayed to the left of the knob (A)