Robomow Help Center Type your question Or Choose a category to find the help you need
Mow over current (28)(43)
This article is intended for Robomow professional dealers.
For RS / MS / RC / MC models
Mowing motor has faced an over-current for too long.
CAUTION – Switch off the Safety Switch before checking the following.
Possible reasons for such error may be:
|Problem Cause||Corrective Action|
|High grass||Raise Mowing height CAUTION – Switch off the Safety/System Switch!|
|Severe grass accumulation under the mowing deck||Clean out accumulated grass clippings using a wooden stick.|
|Mowing motor is stuck||Inspect blades for foreign material or debris preventing rotation|
|Rope or similar object wrapped around the mowing blade||Remove foreign material preventing the mowing blade rotation|