Robomow Help Center Type your question Or Choose a category to find the help you need

High mow current

This article is intended for Robomow professional dealers.

 

For RS / MS / RC / MC models

Mowing motor has faced an over-current for too long.

CAUTION – Switch off the Safety Switch before checking the following

Possible reasons for such error may be:

 

Problem Cause Corrective Action
High grass Raise Mowing height CAUTION – Switch off the Safety/System Switch !
Severe grass accumulation under the mowing deck Clean out accumulated grass clippings using a wooden stick.
Mowing motor is stuck Inspect blades for foreign material or debris preventing rotation
Rope or similar object wrapped around the mowing blade Remove foreign material preventing the mowing blade rotation