Robomow Help Center Type your question Or Choose a category to find the help you need

How do I activate/unlock the child lock?

RX-Models:

Child protection prevents accidental use of Robomow by little children. To enable child protection, press and hold the GO + STOP buttons together for 6 seconds.

If you wish to disable child protection, press and hold the GO + STOP buttons together for 6 seconds again. Alternatively, child protection can be enabled or disabled conveniently via the mobile app (RX20 Pro and RX20u models only).

 

When child protection is enabled, a special combination of keys is required to start a mowing operation. Hold down the STOP button and press the GO button once to unlock the child protection for 30 seconds. The Lock indication will be temporarily switched off. Now you can start a mowing operation as described above. As soon as the mowing operation is started, the child protection will automatically relock itself.

 

 

 

RC/MC-Model :
The Child Lock feature locks the buttons to prevent unintended operation, especially by children. If the Child Lock is set to 'On'(Menu P010), to operate the mower it is required to first press one of the operating mode buttons and then press the OK button to confirm.

RS/MS-Model:
The Child Lock feature locks the buttons to prevent unintended operation, especially by children. To turn this feature on, set Child Lock to On (under the Mower Settings menu). When the Child Lock is turned On, Keys Locked is displayed.

To temporarily release Keys Locked :

Press  then 

* The keys will re-lock after 30 min, without user intervention.