Robomow Help Center Type your question Or Choose a category to find the help you need

High workload

This article is intended for Robomow professional dealers.

 

For RS / MS / RC / MC models

Mow and Drive current are significantly higher than normal.
Possible reasons for such error may be:

 

Problem Cause Corrective Action
High grass Raise Mowing height CAUTION – Switch off the Safety/System Switch !
Lawn conditions Check the lawn for no obsicles, or holes in the ground that eliminate the drive wheels to rotate freely.
Drive wheels clean from mud Clean Drive wheels from mud
Severe grass accumulation under the mowing deck Clean out accumulated grass clippings using a wooden stick.
Mowing motor is stuck Inspect blades for foreign material or debris preventing rotation
Rope or similar object wrapped around the mowing blade Remove foreign material preventing the mowing blade rotation
Internal malfinction A further investigation required by an authorized technnitian. Call Robomow Hotline.
http://robomow.eu/ Contact us page