Robomow Help Center Type your question Or Choose a category to find the help you need

Battery Problem

This article is intended for Robomow professional dealers.

 

For RS / MS / RC / MC models

The robot returns to the Base Station after a relatively short working time due to battery voltage drop. This can happen because the battery voltage fall below 20 volts or because one of the battery cells drops below 3 volts.

 

Problem Cause Corrective Action
Often malfunction caused by poor contact in one of the pins of the battery cable

Remove and insert the battery cable several times.
Watch the video: how to replace battery on RC / MC models

Check visually that no mechanical damage and all contacts are in place and also that no signs of corrosion or contamination on pins.
If the problem is not solved, then it is required to replace the Battery.