Robomow Help Center Type your question Or Choose a category to find the help you need

How do I fix a cut wire in the lawn?

Click here for watching the video

If the Perimeter Wire needs to be spliced, use the connectors supplied in the Robomow box. They are waterproof and give a reliable electrical connection.

IMPORTANT ! Before splicing the Perimeter Wire, disconnect the Power Box from the power outlet.

 

Option 1:

  • Strip 1 cm (0.5 inch) of each wire end together and twist the stripped ends using pliers.
  • Insert the twisted wires into the splicing connector.
  • Screw the wire connector on the twisted wires. Make sure it is tightly secured.

IMPORTANT ! Neither twisted cables nor a screw terminal insulated with insulation tape, are a satisfactory splice. Soil moisture will cause such conductors to oxidize and will later lead to a broken circuit.

 

 

Option 2:

  • Insert both wire ends in the connector at left-most and rightmost positions.
  • Confirm that the wires are fully inserted into the connector.
  • Use a pair of pliers to press down the button on top of the
    connector. The button should be fully pressed, without damaging the connector.

    New_Connectors_Instructions.png