Robomow Help Center Type your question Or Choose a category to find the help you need

(E5) Check blade / Cutting height message

 

This article contains the following sections:

 

 

For RC, TC, MC models

Q1 . Is it the first cut of the season or is the grass very high?

If Yes – Lift the mowing height level and let the robot complete a full cycle (2-3 days).

If No – Proceed to Q2.

 

Q2 . CAUTION : Turn the System Switch to OFF, remove the robot out of its Base Station and carefully check if the mowing blade is freely rotating. See the image to the right.

Confirm that the mowing deck is clean from grass mulching and that the blade can rotate freely?

If Yes – Proceed to Q3.

If No – Clean the mowing deck and proceed to Q3.

 

 

Q3 . Place the robot in a place where there is not a high level of grass, make sure the mowing height is in its fully upper position, and send the robot to mow. Will the robot stop with a mowing error message?

If Yes – Contact the Hot Line for further analysis

If No – Let the robot work. Reduce mowing height gradually.

 

 

For RS, TS, MS models

Q1 . Is it the first cut of the season or is the grass very high?

If Yes – Lift the mowing height level and let the robot complete a full cycle (2-3 days).

If No – Proceed to Q2.

 

 

Q2 . CAUTION: Turn the Safety Switch to OFF, remove the robot out of its Base Station, and carefully check if the mowing blades are freely rotating. See the image to the right.

Confirm that the mowing deck is clean from grass mulching and that the blades can rotate freely?

If Yes – Proceed to Q3.

If No – Clean the mowing deck and proceed to Q3.

 

Q3 . Place the robot in a place where there is not a high level of grass, make sure the

mowing height is in its fully upper position, and send the robot to mow. Will
the robot stop with a mowing error message?

If Yes – Contact the Hot Line for further analysis

If No – Let the robot work. Reduce mowing height gradually.