Robomow Help Center Type your question Or Choose a category to find the help you need

How should I install the perimeter wire along a wall or high obstacle?

RX-Model

When the edge is a wall, prefer to set the Perimeter Wire at a distance III (36cm) of the RoboRuler to minimize uncut areas:

36_cm_From_Wall_RX.png

 

If the mower bumps in a rigid lawn’s border too frequently, move the Perimeter Wire to be at a distance IV (45 cm) of the RoboRuler.

 

 

RC-Model

If the edge is sloped (a maximum of 10% is allowed), or is bordered with high obstacles such as a wall or fence, the Perimeter Wire should be laid at a distance of 28 cm (11 inches) from the obstacle. Use the longer distance of the RoboRuler to set the distance of the wire from a wall.

RS-Model

If the edge is sloped (a maximum of 15% is allowed), or is bordered with high obstacles such as a wall or fence, the Perimeter Wire should be laid at a distance of 40 cm (1.3 ft) from the obstacle. Use the longer distance of the RoboRuler to set the distance of the wire from a wall.