This article contains the following sections:
Q1 - Do the light bulbs (LEDs) on the Power Box show the expected colors?
Indicators 1 and 2 should be lit.
1. Docking Indicator
2. Automatic Indicator
3. Operating Indicator
4. Wire Indicator
If Yes – Proceed to Q2.
If No – Proceed to article, Power Box Is Not Operating / Seems To Be Dead. What Should I Do?
Q2 - Disconnect the winter charging from the robot’s charging plug. Wait a few seconds and then check the robot screen. Does the screen show the Time and the date?
If Yes – Proceed to Q3.
If No – Proceed to article, Robomow stops with no message / Does not wake up. What could be the reason?
Q3 - Connect a winter charging to the robot’s charging plug. Wait 1 minute and check the robot’s screen. Make sure the System Switch is On. Does the screen show the day icon + battery icon?
If Yes – This is the expected behavior and icons to show. Let the robot continue charging and if the problem happens again, contact the Hot Line.
If No – Call Robomow Hotline for further analysis.
Q1 - Do the light bulbs (LEDs) on the Power Box show the expected colors?
Indicators 1 and 2 should be lit.
1. Docking Indicator
2. Automatic Indicator
3. Operating Indicator
4. Wire Indicator
If Yes – Proceed to Q2.
If No – Proceed to article, Power Box Is Not Operating / Seems To Be Dead. What Should I Do?
Q2. Remove the charging adapter from the robot’s charging contacts. Wait a few seconds and check the robot screen. Does the screen show Zone Main or Zone A?
If Yes – Proceed to Q3.
If No – Proceed to article, Robomow stops with no message / Does not wake up. What could be the reason?
Q3. Connect the charging adapter back to the robot’s charging contacts. Wait 1 minute and check the robot screen. Make sure the Safety Switch is On. Does the screen show icon + Charging sign, or
icon + “READY”?
If Yes – This is the expected behavior and icons to show. Let the robot continue charging and if the problem happens again, contact the Hotline.
If No – Call Robomow Hotline for further analysis.
Comments
0 comments
Please sign in to leave a comment.