 |
 |
 |
Buzzer | |
 |
every 3 sec |
|
OFF | Robomow is asleep. Press any button to wake it up or connect with the mobile app. |
|
 |
 |
OFF | Robomow is outside the base and the battery is nearly empty (less than 10% capacity). |
|
|
 |
OFF | Robomow is outside the base and the battery is too low for mowing (only driving to the base is possible). |
|
|
 |
OFF | Robomow is charging, but the battery is still very weak. |
|
|
 |
OFF | Robomow is charging. |
|
|
|
OFF | Robomow is fully charged. |
|
 |
|
Beep for 5 sec | Robomow is departing for an operation. |
|
 |
|
OFF | Robomow is outside the base and the battery is strong. |
|
|
|
OFF | Robomow is on its way to the base station or a starting point. |
 |
|
|
OFF | Child protection is enabled. |
 |
|
|
OFF | Theft protection is enabled. |
|
Blinking orange 3 times |
 |
|
OFF | The Disabling Device is removed. No operation is allowed. |
|
  |
|
OFF | Robomow is in Demo Mode or is being operated via mobile app's remote control. |
|
 |
 |
1/2/3/4 beeps | Robomow has run into a fault. See "Basic Troubleshooting of Robomow RX" article for a solution. |
|
|
|
OFF | Charging problem / "Check Power". |
|
 |
|
2 beeps | Lift calibration is required. See "How to perform lift sensor calibration on Robomow RX" article. |
|
|
|
OFF | General fault. Connect with the mobile app to see more info or call Robomow service. |
Comments
0 comments
Please sign in to leave a comment.