| Buzzer | ||||
|
every 3 sec |
OFF | Robomow is asleep. Press any button to wake it up or connect with the mobile app. | ||
| OFF | Robomow is outside the base and the battery is nearly empty (less than 10% capacity). | |||
| OFF | Robomow is outside the base and the battery is too low for mowing (only driving to the base is possible). | |||
| OFF | Robomow is charging, but the battery is still very weak. | |||
| OFF | Robomow is charging. | |||
| OFF | Robomow is fully charged. | |||
| Beep for 5 sec | Robomow is departing for an operation. | |||
| OFF | Robomow is outside the base and the battery is strong. | |||
| OFF | Robomow is on its way to the base station or a starting point. | |||
| OFF | Child protection is enabled. | |||
| OFF | Theft protection is enabled. | |||
|
Blinking orange 3 times |
OFF | The Disabling Device is removed. No operation is allowed. | ||
| OFF | Robomow is in Demo Mode or is being operated via mobile app's remote control. | |||
| 1/2/3/4 beeps | Robomow has run into a fault. See "Basic Troubleshooting of Robomow RX" article for a solution. | |||
| OFF | Charging problem / "Check Power". | |||
| 2 beeps | Lift calibration is required. See "How to perform lift sensor calibration on Robomow RX" article. | |||
| OFF | General fault. Connect with the mobile app to see more info or call Robomow service. |
What is the meaning of all the different LED indications on Robomow RX's operating panel?
Comments
0 comments
Please sign in to leave a comment.