Where is the best place to install the Base Station on the lawn?

Robomow’s Base Station must be placed along the Perimeter Wire, where the wire “loop” starts and ends.

Other things to keep in mind when placing the Base Station:

Place it on relatively level ground. Do not place it on a slope.

Do not place it within 3 meters from a corner (1 m for RX models).

 Place it close enough (within 20 m for RS models / within 15 m for RC models/ within 10 m for RX models) to a power outlet (230V / 120V).

•  Put it in a shady spot. This will extend the battery lifetime.
•  Make sure it is invisible from the street.