How does Robomow know when to mow?

RS/RC models

Robomow RS/RC model’s mowing schedule is defined by three major parameters:

• Lawn area
• Inactive times
• Mowing frequency (Mowing Interval)

The lawn area defines the required mowing time for your lawn – this is the duration of a single mowing cycle. The inactive times define the hours and days when Robomow should not be on the lawn. The mowing frequency (Interval) parameter defines how often a new mowing cycle should start (once a week, twice a week, etc.).

During active times, Robomow will continuously alternate between mowing and charging until it completes the entire mowing cycle. After a mowing cycle is completed, it will stay in the Base Station until the next Mowing Cycle should start, depending on the configured mowing frequency. By default, Robomow completes two Mowing Cycles per week in order to keep your lawn healthy and looking good. However if your lawn requires more maintenance time, you can easily adjust the time Robomow runs in a single Mowing Cycle, by setting the “Mowing Hours %” (Intensity) parameter.