How should I install the perimeter wire near a swimming pool/watercourse?

RC/MC-model

If the working area is adjacent to a swimming pool, watercourse, slope greater than 10%, precipice higher than 50cm (20 inches) or a public road, the Perimeter Wire must be supplemented with a fence or the like. The height must then be at least 15cm (6 inches). This will prevent the mower from ending up outside the working area under any circumstances.

If there is no fence or the like, then lay the Perimeter Wire at a minimum distance of 1.2m from the water.

RS / MS Model

If the work area is adjacent to a swimming pool, watercourse, slope whose slope exceeds 10 percent, precipices higher than 50 cm or a public road, then the edge cable must be supplemented with a fence or similar. The height must then be at least 15 cm. In any case, this prevents the mower from falling outside the work area. If there is such an obstacle, you can lay the edge cable 40 cm from it. If there is no fence or similar, then lay out the edge cable at a minimum distance of 1.2 m from the water.