The Rain Sensor is a hardware device installed on the body of the Robomow mower. It is capable of sensing rainy or highly humid conditions. The sensitivity of the Rain Sensor can be adjusted in Robomow’s settings. In case a rainy or highly humid condition is detected by the Rain Sensor, it will signal to Robomow to halt current operation, and start searching for the base station. If rain is detected while Robomow is in the base station and an automatic operation is about to start, a “rain detected” message will be displayed by Robomow, and the automatic operation will resume 30 minutes after rain is no longer detected by the Rain Sensor.
*RX models are not equipped with a rain sensor.
Please sign in to leave a comment.